Our Products
Thermal Spray Equipment
Arc Spray Equipment
The coating material is melted with electric arc and then atomized with compressed air to create a spray stream that applies the coating onto the surface being sprayed. Anti-corrosion or engineering coatings can be applied by arc spray and changing between the two is quite simple.
Our Arc Spray systems have time-tested performance for application of:
- Engineering Coatings for the reclamation of worn-out parts and to impart wear and/or abrasion resistant properties of components/parts working from ambient to high temperature.
- Corrosion Resistant Coatings to protect critical industrial equipment from aggressive environments.
SETL has full range of Metallisation arc spray systems for hand-held and fully automatic / robotic applications.
Flame Spray Equipment
The coating material is melted with Oxy-Fuel flame and then atomized with compressed air to create a spray stream that applies the coating onto the surface being sprayed. Anti-corrosion coatings are typically applied with oxy-propane systems.
Engineering coatings are typically applied with oxy-acetylene systems. Where propane is not available, oxy-acetylene systems can apply anti-corrosion coatings.
Flame spray systems are commonly manually operated but it is possible to semi-automate or fully-automate the process if required.
SETL has full range of Metallisation wire, powder and ceramic rod flame spray systems in hand-held or automated versions.
Air Plasma Spray Equipment
In the case of Plasma spraying, the plasma is created by striking an electric arc between the nozzle and the electrode inside the plasma gun. The plasma jet then emerges from the nozzle.
Powder particles are injected into this jet where they soften and then strike the surface at high velocity to produce a strongly adherent coating.
SETL offer a Pistol Control Console plasma spray system of Metllisation Limited that is capable to spray a range of commonly available plasma pistols, as well as our own PS50 pistol.
HVOF Equipment
A fuel (commonly kerosene or hydrogen) is mixed with oxygen and ignited in combustion chamber.
The combustion gases are accelerated through a nozzle. Powder is introduced into the gas stream where it softens and gathers speed before coating onto the sprayed surface.
These coatings are commonly used as a hard chrome replacement process and produce very dense, hard wearing coatings.
SETL offer two variants of HVOF Pistol Control Consoles of Metallisation Limited to operate either liquid fuel or gas fuel pistols.
Laser Equipment
The laser cladding process is a method of applying a fully dense, metallurgically bonded and virtually pure coating which can be used to increase the wear resistance, corrosion resistance or impact performance of metallic components.
In some cases, all three of the properties can be improved. The process utilises a precisely focused high power laser beam to create a weld pool into which a metallic powder is applied.
The powder, which is carried by a stream of inert shielding gas, is blown co-axially through the laser beam. The highly accurate nature of the laser beam allows fully dense cladding with minimal dilution (<5%), yet with a perfect metallurgical bond.
SETL offers MET-CLAD system of Metallisation with control and integration of the entire cladding process. The system offers control of the process gases, cooling system, laser, powder feed and automation interface safely via an intuitive, touch-screen interface.
Consumable
Surface engineering and Technologies (private) Limited offers complete range of engineering and corrosion resistant coating materials in the form of wires and powders to be used in any of the thermal spraying processes.
Accessories
Surface Engineering and Technologies (Private) Limited offers complete range of ancillary items required to perform the Thermal Spray coatings operations, perform quality inspection, and to achieve high quality coatings.
Polymeric Coatings
Metal Repair Compounds & Ceramic Coatings
In order to cater the industrial and marine requirement of Pakistan market for high performance protective coatings to conduct repair and protect system equipment used in highly abrasive and high fluid flow applications, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and metal repair compounds.
Wet & Rust Tolerant Coatings
In order to cater the industrial and marine requirement of Pakistan market for high performance protective coatings to apply on rusty or poorly prepared and wet surfaces, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and metal repair compounds.
High Temperature coatings
In order to cater the industrial and marine requirement of Pakistan market for high performance protective coatings for assets working in high temperature from 125C to 850C, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and metal repair compounds.
Vinyl Ester and Polyester Coatings
In order to cater the industrial and marine requirement of Pakistan market for high performance glass flake Vinyl Ester, Polyester, and Epoxy Novolac based coatings for assets protection from aggressive and corrosive chemicals, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and metal repair compounds.
Industrial Floor Coatings
In order to cater the industrial and marine requirement of Pakistan market for high performance protective coatings requirement for concrete floors, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and concrete repair compounds.
Concrete Repair Systems
In order to cater the industrial and marine requirement of Pakistan market for high performance concrete repair systems, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and metal repair compounds.
Structural Coatings
In order to cater the industrial and marine requirement of Pakistan market for high performance protective coatings for support structure in industry, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and metal repair compounds.
Tank and Pipe Linings
In order to cater the industrial and marine requirement of Pakistan market for high performance protective coatings for Tank and Pipeline internal surface, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and metal repair compounds.
Under Water Coatings
In order to cater the industrial and marine requirement of Pakistan market for high performance Under Water protective coatings and fillers for marine and industrial environment, Surface engineering and Technologies (Private) Limited has partnered with Chemco International which is a UK-based renowned organization for design and manufacturing of corrosion resistant coatings and metal repair compounds.
High Performance Ceramics
We understand the requirements of critical system equipment of an industry and try our level best to meet with these requirements and provide with the best available materials to meet these requirements.
SETL has partnered with CERAMDIS a Swiss company and produces technical ceramics (high performance ceramics). With over 20 years of experience, we distinguish ourselves as a reliable partner in the following areas:
- Customer-specific components in various ceramic materials: silicon nitride, silicon carbide, zirconium oxide, aluminum oxide, and other similar ceramic materials.
- Planning and production of assemblies and subassemblies.
- Individual customer consulting and product development.
Please refer to the link below for further details on our ceramic materials:
The exceptional properties of our high performance ceramics make it impossible to exhaustively list their areas of application. But for an overview of some of the most important applications please refer to the following link:
